Environment Preparation

Windows and Mac users are recommended to use Anaconda to build a Python environment, and Linux users are recommended to use docker to build a Python environment.

Recommended working environment:

PaddlePaddle >= 2.1.2
Python 3.7
CUDA 10.1 / CUDA 10.2
cuDNN 7.6

If you already have a Python environment installed, you can skip to PaddleOCR Quick Start.

1. Python Environment Setup

1. Python Environment Setup

1.1 Windows

1.1.1 Install Anaconda

Note: To use PaddlePaddle you need to install python environment first, here we choose python integrated environment Anaconda toolkit
- Anaconda is a common python package manager
- After installing Anaconda, you can install the python environment, as well as numpy and other required toolkit environment.
Anaconda download.
- Address: https://mirrors.tuna.tsinghua.edu.cn/anaconda/archive/?C=M&O=D
- Most Win10 computers are 64-bit operating systems, choose x86_64 version; if the computer is a 32-bit operating system, choose x86.exe
- After the download is complete, double-click the installer to enter the graphical interface
- The default installation location is C drive, it is recommended to change the installation location to D drive.
- Check Conda to add environment variables and ignore the warning that

1.1.2 Opening the terminal and creating the Conda environment

Open Anaconda Prompt terminal: bottom left Windows Start Menu -> Anaconda3 -> Anaconda Prompt start console

Create a new Conda environment

  # Enter the following command at the command line to create an environment named paddle_env
  # Here to speed up the download, use the Tsinghua source
  conda create --name paddle_env python=3.8 --channel https://mirrors.tuna.tsinghua.edu.cn/anaconda/pkgs/free/ # This is a one line command

This command will create an executable environment named paddle_env with python version 3.8, which will take a while depending on the network status

The command line will then output a prompt, type y and enter to continue the installation

To activate the Conda environment you just created, enter the following command at the command line.

  # Activate the paddle_env environment
  conda activate paddle_env
  # View the current location of python
  where python

The above anaconda environment and python environment are installed

1.2 Mac

1.2.1 Installing Anaconda

Note: To use PaddlePaddle you need to install the python environment first, here we choose the python integrated environment Anaconda toolkit
- Anaconda is a common python package manager
- After installing Anaconda, you can install the python environment, as well as numpy and other required toolkit environment
Anaconda download:.
- Address: https://mirrors.tuna.tsinghua.edu.cn/anaconda/archive/?C=M&O=D

Select Anaconda3-2021.05-MacOSX-x86_64.pkg at the bottom to download
After downloading, double click on the .pkg file to enter the graphical interface
- Just follow the default settings, it will take a while to install
It is recommended to install a code editor such as VSCode or PyCharm

1.2.2 Open a terminal and create a Conda environment

Open the terminal
- Press command and spacebar at the same time, type "terminal" in the focus search, double click to enter terminal

Add Conda to the environment variables

Environment variables are added so that the system can recognize the Conda command
Open ~/.bash_profile in the terminal by typing the following command.

vim ~/.bash_profile

Add Conda as an environment variable in ~/.bash_profile.

# Press i first to enter edit mode
# In the first line type.
export PATH="~/opt/anaconda3/bin:$PATH"
# If you customized the installation location during installation, change ~/opt/anaconda3/bin to the bin folder in the customized installation directory

# The modified ~/.bash_profile file should look like this (where xxx is the username)
export PATH="~/opt/anaconda3/bin:$PATH"
# >>> conda initialize >>>
# !!! Contents within this block are managed by 'conda init' !!!
__conda_setup="$('/Users/xxx/opt/anaconda3/bin/conda' 'shell.bash' 'hook' 2> /dev/null)"
if [ $? -eq 0 ]; then
        eval "$__conda_setup"
else
        if [ -f "/Users/xxx/opt/anaconda3/etc/profile.d/conda.sh" ]; then
                . "/Users/xxx/opt/anaconda3/etc/profile.d/conda.sh"
        else
                export PATH="/Users/xxx/opt/anaconda3/bin:$PATH"
        fi
fi
unset __conda_setup
# <<< conda initialize <<<

When you are done, press esc to exit edit mode, then type :wq! and enter to save and exit
Verify that the Conda command is recognized.
Enter source ~/.bash_profile in the terminal to update the environment variables
Enter conda info --envs in the terminal again, if it shows that there is a base environment, then Conda has been added to the environment variables

Create a new Conda environment

  # Enter the following command at the command line to create an environment called paddle_env
  # Here to speed up the download, use Tsinghua source
  conda create --name paddle_env python=3.8 --channel https://mirrors.tuna.tsinghua.edu.cn/anaconda/pkgs/free/

This command will create an executable environment named paddle_env with python version 3.8, which will take a while depending on the network status
The command line will then output a prompt, type y and enter to continue the installation
To activate the Conda environment you just created, enter the following command at the command line.

  # Activate the paddle_env environment
  conda activate paddle_env
  # View the current location of python
  where python

The above anaconda environment and python environment are installed

1.3 Linux

Linux users can choose to run either Anaconda or Docker. If you are familiar with Docker and need to train the PaddleOCR model, it is recommended to use the Docker environment, where the development process of PaddleOCR is run. If you are not familiar with Docker, you can also use Anaconda to run the project.

1.3.1 Anaconda environment configuration

Note: To use PaddlePaddle you need to install the python environment first, here we choose the python integrated environment Anaconda toolkit
- Anaconda is a common python package manager
- After installing Anaconda, you can install the python environment, as well as numpy and other required toolkit environment
Download Anaconda.
- Download at: https://mirrors.tuna.tsinghua.edu.cn/anaconda/archive/?C=M&O=D

Select the appropriate version for your operating system
- Type uname -m in the terminal to check the command set used by your system
Download method 1: Download locally, then transfer the installation package to the Linux server

Download method 2: Directly use Linux command line to download

# First install wget
sudo apt-get install wget # Ubuntu
sudo yum install wget # CentOS

# Then use wget to download from Tsinghua source
# If you want to download Anaconda3-2021.05-Linux-x86_64.sh, the download command is as follows
wget https://mirrors.tuna.tsinghua.edu.cn/anaconda/archive/Anaconda3-2021.05-Linux-x86_64.sh
# If you want to download another version, you need to change the file name after the last 1 / to the version you want to download

To install Anaconda.
- Type sh Anaconda3-2021.05-Linux-x86_64.sh at the command line
- If you downloaded a different version, replace the file name of the command with the name of the file you downloaded
- Just follow the installation instructions
- You can exit by typing q when viewing the license

Add conda to the environment variables

If you have already added conda to the environment variable path during the installation, you can skip this step
Open ~/.bashrc in a terminal.

# Enter the following command in the terminal.
vim ~/.bashrc

Add conda as an environment variable in ~/.bashrc.

# Press i first to enter edit mode # In the first line enter.
export PATH="~/anaconda3/bin:$PATH"
# If you customized the installation location during installation, change ~/anaconda3/bin to the bin folder in the customized installation directory

# The modified ~/.bash_profile file should look like this (where xxx is the username)
export PATH="~/opt/anaconda3/bin:$PATH"
# >>> conda initialize >>>
# !!! Contents within this block are managed by 'conda init' !!!
__conda_setup="$('/Users/xxx/opt/anaconda3/bin/conda' 'shell.bash' 'hook' 2> /dev/null)"
if [ $? -eq 0 ]; then
    eval "$__conda_setup"
else
    if [ -f "/Users/xxx/opt/anaconda3/etc/profile.d/conda.sh" ]; then
        . "/Users/xxx/opt/anaconda3/etc/profile.d/conda.sh"
    else
        export PATH="/Users/xxx/opt/anaconda3/bin:$PATH"
    fi
fi
unset __conda_setup
# <<< conda initialize <<<

When you are done, press esc to exit edit mode, then type :wq! and enter to save and exit
Verify that the Conda command is recognized.
Enter source ~/.bash_profile in the terminal to update the environment variables
Enter conda info --envs in the terminal again, if it shows that there is a base environment, then Conda has been added to the environment variables

Create a new Conda environment

  # Enter the following command at the command line to create an environment called paddle_env
  # Here to speed up the download, use Tsinghua source
  conda create --name paddle_env python=3.8 --channel https://mirrors.tuna.tsinghua.edu.cn/anaconda/pkgs/free/

This command will create an executable environment named paddle_env with python version 3.8, which will take a while depending on the network status
The command line will then output a prompt, type y and enter to continue the installation
To activate the Conda environment you just created, enter the following command at the command line.

  # Activate the paddle_env environment
  conda activate paddle_env

The above anaconda environment and python environment are installed

1.3.2 Docker environment preparation

The first time you use this docker image, it will be downloaded automatically. Please be patient.

# Switch to the working directory
cd /home/Projects
# You need to create a docker container for the first run, and do not need to run the current command when you run it again
# Create a docker container named ppocr and map the current directory to the /paddle directory of the container

# If using CPU, use docker instead of nvidia-docker to create docker
sudo docker run --name ppocr -v $PWD:/paddle --network=host -it  registry.baidubce.com/paddlepaddle/paddle:2.1.3-gpu-cuda10.2-cudnn7  /bin/bash

# If using GPU, use nvidia-docker to create docker
# docker image registry.baidubce.com/paddlepaddle/paddle:2.1.3-gpu-cuda11.2-cudnn8 is recommended for CUDA11.2 + CUDNN8.
sudo nvidia-docker run --name ppocr -v $PWD:/paddle --shm-size=64G --network=host -it registry.baidubce.com/paddlepaddle/paddle:2.1.3-gpu-cuda10.2-cudnn7 /bin/bash

You can also visit DockerHub to get the image that fits your machine.

# ctrl+P+Q to exit docker, to re-enter docker using the following command:
sudo docker container exec -it ppocr /bin/bash

environment_en.md 13 KB History Raw

Environment Preparation

1. Python Environment Setup

1.1 Windows

1.1.1 Install Anaconda

1.1.2 Opening the terminal and creating the Conda environment

1.2 Mac

1.2.1 Installing Anaconda

1.2.2 Open a terminal and create a Conda environment

1.3 Linux

1.3.1 Anaconda environment configuration

1.3.2 Docker environment preparation

environment_en.md 13 KB

History Raw